T 200 E is a micro processor based Ramping Controller, especially designed and developed for the automation of textile dyeing machines. Thanks to modular structure of T 200 E, input/output numbers can be increased from 4/4/1/1 to 12/12/3/3 by using miniMIO4411 modules.
Graphical interface is used both for programming and monitoring of the dyeing process. The implementation of T 200 E is not limited to dyeing machines only. It is used in a wide range of industrial applications, where ramping control of temperature is necessary.
Product Specifications
| • |
Dyeing programming and monitoring via graphical screen
| |
• |
I/O numbers (modular): 4/4/1/1 (min), 12/12/3/3 (max) (by miniMIO4411 modul) |
| • |
2 levels password protection 1st level: system parameters 2nd level: programming |
|
• |
Last 8 hours monitoring of past, theoretical and realized batch processes (x2) |
| • |
Autotune facility for 2 independent (temperature and dosage control) PID loops |
|
• |
Commands: Heat, Cool, Fill, Drain, Dosage, Pump Motor Direction, Warning/Alarm, .... |
| • |
Last 10 alarms archive |
|
• |
128*64 graphical OLED display |
| • |
Remote SW upgrade |
|
• |
•Program loading and back-up with SD card |
| • |
PC connection and remote monitoring through ModBus RTU |
|
• |
RS422 and RS232 serial connection (by Com 200 modul) |
| • |
Selectable languages: Turkish - English |
|
• |
90 Programs X 50 Steps |
| |
| Technical
Specifications |
| |
| Analog Input |
:min 1, max 3
(Pt100/TC/4-20 mA-selectable)
|
|
Digital
Input |
min 4, max 12
|
| Analog Output |
min 1, max 3 (0/4-20 mA) |
|
Digital Output |
min 4, max 12
(250 VAC / 30 VDC, 1A Relay) |
| Communication |
RS422/Modbus, RS 232 |
|
Memory |
1 GB (SD Card) |
| Operating Temperature |
0-50 °C
|
|
Humidity |
10-85 % (non-condensed
|
| Dimensions |
100x100x100, 91x91 (panel cut)
|
|
Supply
Voltage |
24 V DC, 1 W
|
PDF Brochure
| 
