| |
|
>> PRODUCTS > Sensors > S30
|
 |
|
| |
S30 is
designed to provide a reliable seam detection on
most types of dyeing machinery. Detection of the
seam makes it possible to control the machine speed
or to run passage based procedures.
The sensor is to be mounted outside the machinery,
where it is triggered by a small magnet sewn into
the fabric seam. Sensing distance can be selected as normal or high. |
| |
| Product
Specifications |
| • |
Sensing speed
0.02-10 m/s
| |
• |
24 V DC (18-30 V DC) supply voltage |
| • |
Normally
open contact output (MOSFET) |
|
• |
Sensing Distance: Normal 0-25 +/- 5 cm |
| • |
Single piece
& compact design |
|
|
Sensing Distance: High 0-35 +/- 5 cm |
Technical Specifications
|
Sensing Distance |
>Normal 0-25 +/- 5 cm >High 0-35 +/- 5 cm
|
|
Output Protection |
35 V MOV
|
|
Min. Output Pulse Length |
1 sec
|
|
Signal |
Output Red LED
|
|
Min. Sensing Period |
3 sec
|
|
Supply Green LED
|
| Sensing
Speed |
0.02-10 m/s
|
|
Sensing Magnet |
AlNiCo and Samarium Cobald (Min.
0.5 Oe)
|
| Excitation
Voltage |
24 V (18-30V) DC
|
|
Power
Consumption |
750 mW
|
| Load
Current |
100 mA (24 V AC/DC)
|
|
Weight |
105 gr
|
|
Operating Temperature |
0-95 °C
|
|
Cable
Length |
2 m
|
PDF Brochure
|
|
